camper/po/ca.po

455 lines
11 KiB
Plaintext
Raw Normal View History

Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
# Catalan translations for camper package
# Traduccions al català del paquet «camper».
# Copyright (C) 2023 THE camper'S COPYRIGHT HOLDER
# This file is distributed under the same license as the camper package.
# jordi fita mas <jordi@tandem.blog>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: camper\n"
"Report-Msgid-Bugs-To: jordi@tandem.blog\n"
"POT-Creation-Date: 2023-08-15 22:22+0200\n"
Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
"PO-Revision-Date: 2023-07-22 23:45+0200\n"
"Last-Translator: jordi fita mas <jordi@tandem.blog>\n"
"Language-Team: Catalan <ca@dodds.net>\n"
"Language: ca\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/public/home.gohtml:6
msgctxt "title"
msgid "Home"
msgstr "Inici"
#: web/templates/public/layout.gohtml:11 web/templates/public/layout.gohtml:21
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
msgid "Campsite Montagut"
msgstr "Càmping Montagut"
#: web/templates/public/layout.gohtml:20 web/templates/admin/layout.gohtml:18
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
msgid "Skip to main content"
msgstr "Salta al contingut principal"
#: web/templates/public/layout.gohtml:38
msgid "Singular Lodges"
msgstr "Allotjaments singulars"
#: web/templates/admin/campsite/form.gohtml:8
#: web/templates/admin/campsite/form.gohtml:25
msgctxt "title"
msgid "Edit Campsite"
msgstr "Edició de lallotjament"
#: web/templates/admin/campsite/form.gohtml:10
#: web/templates/admin/campsite/form.gohtml:27
msgctxt "title"
msgid "New Campsite"
msgstr "Nou allotjament"
#: web/templates/admin/campsite/form.gohtml:37
#: web/templates/admin/campsite/type/form.gohtml:37
#: web/templates/admin/campsite/type/index.gohtml:18
msgctxt "campsite type"
msgid "Active"
msgstr "Actiu"
#: web/templates/admin/campsite/form.gohtml:46
msgctxt "input"
msgid "Campsite Type"
msgstr "Tipus dallotjament"
#: web/templates/admin/campsite/form.gohtml:51
msgid "Select campsite type"
msgstr "Escolliu un tipus dallotjament"
#: web/templates/admin/campsite/form.gohtml:60
msgctxt "input"
msgid "Label"
msgstr "Etiqueta"
#: web/templates/admin/campsite/form.gohtml:70
#: web/templates/admin/campsite/type/form.gohtml:63
msgctxt "action"
msgid "Update"
msgstr "Actualitza"
#: web/templates/admin/campsite/form.gohtml:72
#: web/templates/admin/campsite/type/form.gohtml:65
msgctxt "action"
msgid "Add"
msgstr "Afegeix"
#: web/templates/admin/campsite/index.gohtml:6
#: web/templates/admin/campsite/index.gohtml:12
msgctxt "title"
msgid "Campsites"
msgstr "Allotjaments"
#: web/templates/admin/campsite/index.gohtml:11
msgctxt "action"
msgid "Add Campsite"
msgstr "Afegeix allotjament"
#: web/templates/admin/campsite/index.gohtml:17
msgctxt "header"
msgid "Label"
msgstr "Etiqueta"
#: web/templates/admin/campsite/index.gohtml:18
msgctxt "header"
msgid "Type"
msgstr "Tipus"
#: web/templates/admin/campsite/index.gohtml:19
msgctxt "campsite"
msgid "Active"
msgstr "Actiu"
#: web/templates/admin/campsite/index.gohtml:27
#: web/templates/admin/campsite/type/index.gohtml:25
msgid "Yes"
msgstr "Sí"
#: web/templates/admin/campsite/index.gohtml:27
#: web/templates/admin/campsite/type/index.gohtml:25
msgid "No"
msgstr "No"
#: web/templates/admin/campsite/index.gohtml:33
msgid "No campsites added yet."
msgstr "No sha afegit cap allotjament encara."
#: web/templates/admin/campsite/type/form.gohtml:8
#: web/templates/admin/campsite/type/form.gohtml:25
msgctxt "title"
msgid "Edit Campsite Type"
msgstr "Edició del tipus dallotjament"
#: web/templates/admin/campsite/type/form.gohtml:10
#: web/templates/admin/campsite/type/form.gohtml:27
msgctxt "title"
msgid "New Campsite Type"
msgstr "Nou tipus dallotjament"
#: web/templates/admin/campsite/type/form.gohtml:46
#: web/templates/admin/profile.gohtml:26
msgctxt "input"
msgid "Name"
msgstr "Nom"
#: web/templates/admin/campsite/type/form.gohtml:54
msgctxt "input"
msgid "Description"
msgstr "Descripció"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/campsite/type/index.gohtml:6
#: web/templates/admin/campsite/type/index.gohtml:12
msgctxt "title"
msgid "Campsite Types"
msgstr "Tipus dallotjaments"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/campsite/type/index.gohtml:11
msgctxt "action"
msgid "Add Type"
msgstr "Afegeix tipus"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/campsite/type/index.gohtml:17
msgctxt "header"
msgid "Name"
msgstr "Nom"
#: web/templates/admin/campsite/type/index.gohtml:31
msgid "No campsite types added yet."
msgstr "No sha afegit cap tipus dallotjament encara."
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/dashboard.gohtml:6
#: web/templates/admin/dashboard.gohtml:10 web/templates/admin/layout.gohtml:49
msgctxt "title"
msgid "Dashboard"
msgstr "Tauler"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/login.gohtml:6 web/templates/admin/login.gohtml:13
Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
msgctxt "title"
msgid "Login"
msgstr "Entrada"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/login.gohtml:22 web/templates/admin/profile.gohtml:35
#: web/templates/admin/taxDetails.gohtml:50
Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
msgctxt "input"
msgid "Email"
msgstr "Correu-e"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/login.gohtml:31 web/templates/admin/profile.gohtml:46
Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
msgctxt "input"
msgid "Password"
msgstr "Contrasenya"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/login.gohtml:40
Add the skeleton of the web application It does nothing more than to server a single page that does nothing interesting. This time i do not use a router. Instead, i am trying out a technique i have seen in an article[0] that i have tried in other, smaller, projects and seems to work surprisingly well: it just “cuts off” the URI path by path, passing the request from handler to handler until it finds its way to a handler that actually serves the request. That helps to loosen the coupling between the application and lower handlers, and makes dependencies explicit, because i need to pass the locale, company, etc. down instead of storing them in contexts. Let’s see if i do not regret it on a later date. I also made a lot more packages that in Numerus. In Numerus i actually only have the single pkg package, and it works, kind of, but i notice how i name my methods to avoid clashing instead of using packages for that. That is, instead of pkg.NewApp i now have app.New. Initially i thought that Locale should be inside app, but then there was a circular dependency between app and template. That is why i created a separate package, but now i am wondering if template should be inside app too, but then i would have app.MustRenderTemplate instead of template.MustRender. The CSS is the most bare-bones file i could write because i am focusing in markup right now; Oriol will fill in the file once the application is working. [0]: https://blog.merovius.de/posts/2017-06-18-how-not-to-use-an-http-router/
2023-07-22 22:11:00 +00:00
msgctxt "action"
msgid "Login"
msgstr "Entra"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:6 web/templates/admin/profile.gohtml:12
#: web/templates/admin/layout.gohtml:29
msgctxt "title"
msgid "Profile"
msgstr "Perfil"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:17
msgctxt "inut"
msgid "Profile Image"
msgstr "Imatge del perfil"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:43
msgctxt "legend"
msgid "Change password"
msgstr "Canvi de contrasenya"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:55
msgctxt "input"
msgid "Password Confirmation"
msgstr "Confirmació de la contrasenya"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:65
msgctxt "input"
msgid "Language"
msgstr "Idioma"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/profile.gohtml:75
#: web/templates/admin/taxDetails.gohtml:144
msgctxt "action"
msgid "Save changes"
msgstr "Desa els canvis"
#: web/templates/admin/taxDetails.gohtml:6
#: web/templates/admin/taxDetails.gohtml:12
msgctxt "title"
msgid "Tax Details"
msgstr "Configuració fiscal"
#: web/templates/admin/taxDetails.gohtml:17
#: web/templates/admin/taxDetails.gohtml:58
msgctxt "input"
msgid "Business Name"
msgstr "Nom de lempresa"
#: web/templates/admin/taxDetails.gohtml:26
msgctxt "input"
msgid "VAT Number"
msgstr "NIF"
#: web/templates/admin/taxDetails.gohtml:34
msgctxt "input"
msgid "Trade Name"
msgstr "Nom comercial"
#: web/templates/admin/taxDetails.gohtml:42
msgctxt "input"
msgid "Phone"
msgstr "Telèfon"
#: web/templates/admin/taxDetails.gohtml:66
msgctxt "input"
msgid "Address"
msgstr "Adreça"
#: web/templates/admin/taxDetails.gohtml:74
msgctxt "input"
msgid "City"
msgstr "Població"
#: web/templates/admin/taxDetails.gohtml:82
msgctxt "input"
msgid "Province"
msgstr "Província"
#: web/templates/admin/taxDetails.gohtml:90
msgctxt "input"
msgid "Postal Code"
msgstr "Codi postal"
#: web/templates/admin/taxDetails.gohtml:98
msgctxt "input"
msgid "Country"
msgstr "País"
#: web/templates/admin/taxDetails.gohtml:108
msgctxt "input"
msgid "Currency"
msgstr "Moneda"
#: web/templates/admin/taxDetails.gohtml:118
msgctxt "input"
msgid "Default Language"
msgstr "Idioma per defecte"
#: web/templates/admin/taxDetails.gohtml:128
msgctxt "input"
msgid "Invoice Number Format"
msgstr "Format del número de factura"
#: web/templates/admin/taxDetails.gohtml:136
msgctxt "input"
msgid "Legal Disclaimer"
msgstr "Nota legal"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/layout.gohtml:25
msgctxt "title"
msgid "User Menu"
msgstr "Menú dusuari"
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
#: web/templates/admin/layout.gohtml:33
msgctxt "title"
msgid "Company Settings"
msgstr "Paràmetres de lempresa"
#: web/templates/admin/layout.gohtml:38
Add the logout button Conceptually, to logout we have to “delete the session”, thus the best HTTP verb would be `DELETE`. However, there is no way to send a `DELETE` request with a regular HTML form, and it seems that never will be[0]. I could use a POST, optionally with a “method override” technique, but i was planing to use HTMx anyway, so this was as good an opportunity to include it as any. In this application i am not concerned with people not having JavaScript enabled, because it is for a customer that has a known environment, and we do not have much time anyway. Therefore, i opted to forgo progressive enhancement in cases like this: if `DELETE` is needed, use `hx-delete`. Unfortunately, i can not use a <form> with a hidden <input> for the CSRF token, because `DELETE` requests do not have body and the value should be added as query parameters, like a form with GET method, but HTMx does the incorrect thing here: sends the values in the request’s body. That’s why i have to use a custom header and the `hx-header` directive to include the CSRF token. Then, by default HTMx targets the triggered element for swap with the response from the server, but after a logout i want to redirect the user to the login form again. I could set the hx-target to button to replace the whole body, or tell the client to redirect to the new location. I actually do not know which one is “better”. Maybe the hx-target is best because then everything is handled by the client, but in the case of logout, since it is possible that i might want to load scripts only for logged-in users in the future, i opted for the full page reload. However, HTMx does not want to reload a page that return HTTP 401, hence i had to include the GET method to /login in order to return the login form with a response of HTTP 200, which also helps when reloading in the browser after a failed login attempt. I am not worried with the HTTP 401 when attempting to load a page as guest, because this request most probably comes from the browser, not HTMx, and it will show the login form as intended—even though it is not compliant, since it does not return the WWW-Authenticate header, but this is the best i can do given that no cookie-based authentication method has been accepted[1]. [0]: https://www.w3.org/Bugs/Public/show_bug.cgi?id=10671#c16 [1]: https://datatracker.ietf.org/doc/id/draft-broyer-http-cookie-auth-00.html
2023-07-26 11:49:47 +00:00
msgctxt "action"
msgid "Logout"
msgstr "Surt"
#: pkg/app/login.go:56 pkg/app/user.go:246 pkg/company/admin.go:203
msgid "Email can not be empty."
msgstr "No podeu deixar el correu-e en blanc."
#: pkg/app/login.go:57 pkg/app/user.go:247 pkg/company/admin.go:204
msgid "This email is not valid. It should be like name@domain.com."
msgstr "Aquest correu-e no és vàlid. Hauria de ser similar a nom@domini.com."
Add the logout button Conceptually, to logout we have to “delete the session”, thus the best HTTP verb would be `DELETE`. However, there is no way to send a `DELETE` request with a regular HTML form, and it seems that never will be[0]. I could use a POST, optionally with a “method override” technique, but i was planing to use HTMx anyway, so this was as good an opportunity to include it as any. In this application i am not concerned with people not having JavaScript enabled, because it is for a customer that has a known environment, and we do not have much time anyway. Therefore, i opted to forgo progressive enhancement in cases like this: if `DELETE` is needed, use `hx-delete`. Unfortunately, i can not use a <form> with a hidden <input> for the CSRF token, because `DELETE` requests do not have body and the value should be added as query parameters, like a form with GET method, but HTMx does the incorrect thing here: sends the values in the request’s body. That’s why i have to use a custom header and the `hx-header` directive to include the CSRF token. Then, by default HTMx targets the triggered element for swap with the response from the server, but after a logout i want to redirect the user to the login form again. I could set the hx-target to button to replace the whole body, or tell the client to redirect to the new location. I actually do not know which one is “better”. Maybe the hx-target is best because then everything is handled by the client, but in the case of logout, since it is possible that i might want to load scripts only for logged-in users in the future, i opted for the full page reload. However, HTMx does not want to reload a page that return HTTP 401, hence i had to include the GET method to /login in order to return the login form with a response of HTTP 200, which also helps when reloading in the browser after a failed login attempt. I am not worried with the HTTP 401 when attempting to load a page as guest, because this request most probably comes from the browser, not HTMx, and it will show the login form as intended—even though it is not compliant, since it does not return the WWW-Authenticate header, but this is the best i can do given that no cookie-based authentication method has been accepted[1]. [0]: https://www.w3.org/Bugs/Public/show_bug.cgi?id=10671#c16 [1]: https://datatracker.ietf.org/doc/id/draft-broyer-http-cookie-auth-00.html
2023-07-26 11:49:47 +00:00
#: pkg/app/login.go:59
msgid "Password can not be empty."
msgstr "No podeu deixar la contrasenya en blanc."
#: pkg/app/login.go:86
msgid "Invalid user or password."
msgstr "Nom dusuari o contrasenya incorrectes."
Add the logout button Conceptually, to logout we have to “delete the session”, thus the best HTTP verb would be `DELETE`. However, there is no way to send a `DELETE` request with a regular HTML form, and it seems that never will be[0]. I could use a POST, optionally with a “method override” technique, but i was planing to use HTMx anyway, so this was as good an opportunity to include it as any. In this application i am not concerned with people not having JavaScript enabled, because it is for a customer that has a known environment, and we do not have much time anyway. Therefore, i opted to forgo progressive enhancement in cases like this: if `DELETE` is needed, use `hx-delete`. Unfortunately, i can not use a <form> with a hidden <input> for the CSRF token, because `DELETE` requests do not have body and the value should be added as query parameters, like a form with GET method, but HTMx does the incorrect thing here: sends the values in the request’s body. That’s why i have to use a custom header and the `hx-header` directive to include the CSRF token. Then, by default HTMx targets the triggered element for swap with the response from the server, but after a logout i want to redirect the user to the login form again. I could set the hx-target to button to replace the whole body, or tell the client to redirect to the new location. I actually do not know which one is “better”. Maybe the hx-target is best because then everything is handled by the client, but in the case of logout, since it is possible that i might want to load scripts only for logged-in users in the future, i opted for the full page reload. However, HTMx does not want to reload a page that return HTTP 401, hence i had to include the GET method to /login in order to return the login form with a response of HTTP 200, which also helps when reloading in the browser after a failed login attempt. I am not worried with the HTTP 401 when attempting to load a page as guest, because this request most probably comes from the browser, not HTMx, and it will show the login form as intended—even though it is not compliant, since it does not return the WWW-Authenticate header, but this is the best i can do given that no cookie-based authentication method has been accepted[1]. [0]: https://www.w3.org/Bugs/Public/show_bug.cgi?id=10671#c16 [1]: https://datatracker.ietf.org/doc/id/draft-broyer-http-cookie-auth-00.html
2023-07-26 11:49:47 +00:00
#: pkg/app/user.go:197
msgctxt "language option"
msgid "Automatic"
msgstr "Automàtic"
#: pkg/app/user.go:249 pkg/campsite/types/admin.go:197
msgid "Name can not be empty."
msgstr "No podeu deixar el nom en blanc."
#: pkg/app/user.go:250
msgid "Confirmation does not match password."
msgstr "La confirmació no es correspon amb la contrasenya."
#: pkg/app/user.go:251 pkg/company/admin.go:218
msgid "Selected language is not valid."
msgstr "Lidioma escollit no és vàlid."
#: pkg/app/user.go:253
msgid "File must be a valid PNG or JPEG image."
msgstr "El fitxer has de ser una imatge PNG o JPEG vàlida."
#: pkg/app/admin.go:40
Split templates and handlers into admin and public I need to check that the user is an employee (or admin) in administration handlers, but i do not want to do it for each handler, because i am bound to forget it. Thus, i added the /admin sub-path for these resources. The public-facing web is the rest of the resources outside /admin, but for now there is only home, to test whether it works as expected or not. The public-facing web can not relay on the user’s language settings, as the guest user has no way to set that. I would be happy to just use the Accept-Language header for that, but apparently Google does not use that header[0], and they give four alternatives: a country-specific domain, a subdomain with a generic top-level domain (gTLD), subdirectories with a gTLD, or URL parameters (e.g., site.com?loc=de). Of the four, Google does not recommend URL parameters, and the customer is already using subdirectories with the current site, therefor that’s what i have chosen. Google also tells me that it is a very good idea to have links between localized version of the same resources, either with <link> elements, Link HTTP response headers, or a sitemap file[1]; they are all equivalent in the eyes of Google. I have choosen the Link response headers way, because for that i can simply “augment” ResponseHeader to automatically add these headers when the response status is 2xx, otherwise i would need to pass down the original URL path until it reaches the template. Even though Camper is supposed to be a “generic”, multi-company application, i think i will stick to the easiest route and write the templates for just the “first” customer. [0]: https://developers.google.com/search/docs/specialty/international/managing-multi-regional-sites [1]: https://developers.google.com/search/docs/specialty/international/localized-versions
2023-08-05 01:42:37 +00:00
msgid "Access forbidden"
msgstr "Accés prohibit"
#: pkg/campsite/admin.go:218
msgid "Selected campsite type is not valid."
msgstr "El tipus dallotjament escollit no és vàlid."
#: pkg/campsite/admin.go:219
msgid "Label can not be empty."
msgstr "No podeu deixar letiqueta en blanc."
#: pkg/company/admin.go:186
msgid "Selected country is not valid."
msgstr "El país escollit no és vàlid."
#: pkg/company/admin.go:190
msgid "Business name can not be empty."
msgstr "No podeu deixar el nom dempresa en blanc."
#: pkg/company/admin.go:191
msgid "Business name must have at least two letters."
msgstr "El nom dempresa ha de tenir com a mínim dues lletres."
#: pkg/company/admin.go:193
msgid "VAT number can not be empty."
msgstr "No podeu deixar el NIF en blanc."
#: pkg/company/admin.go:194
msgid "This VAT number is not valid."
msgstr "Aquest NIF no és vàlid."
#: pkg/company/admin.go:198
msgid "Phone can not be empty."
msgstr "No podeu deixar el telèfon en blanc."
#: pkg/company/admin.go:199
msgid "This phone number is not valid."
msgstr "Aquest número de telèfon no és vàlid."
#: pkg/company/admin.go:207
msgid "This web address is not valid. It should be like https://domain.com/."
msgstr "Aquesta adreça web no és vàlida. Hauria de ser similar a https://domini.com/."
#: pkg/company/admin.go:209
msgid "Address can not be empty."
msgstr "No podeu deixar ladreça en blanc."
#: pkg/company/admin.go:210
msgid "City can not be empty."
msgstr "No podeu deixar la població en blanc."
#: pkg/company/admin.go:211
msgid "Province can not be empty."
msgstr "No podeu deixar la província en blanc."
#: pkg/company/admin.go:212
msgid "Postal code can not be empty."
msgstr "No podeu deixar el codi postal en blanc."
#: pkg/company/admin.go:213
msgid "This postal code is not valid."
msgstr "Aquest codi postal no és vàlid."
#: pkg/company/admin.go:217
msgid "Selected currency is not valid."
msgstr "La moneda escollida no és vàlida."
#: pkg/company/admin.go:219
msgid "Invoice number format can not be empty."
msgstr "No podeu deixar el format del número de factura en blanc."
#: pkg/auth/user.go:40
Add the logout button Conceptually, to logout we have to “delete the session”, thus the best HTTP verb would be `DELETE`. However, there is no way to send a `DELETE` request with a regular HTML form, and it seems that never will be[0]. I could use a POST, optionally with a “method override” technique, but i was planing to use HTMx anyway, so this was as good an opportunity to include it as any. In this application i am not concerned with people not having JavaScript enabled, because it is for a customer that has a known environment, and we do not have much time anyway. Therefore, i opted to forgo progressive enhancement in cases like this: if `DELETE` is needed, use `hx-delete`. Unfortunately, i can not use a <form> with a hidden <input> for the CSRF token, because `DELETE` requests do not have body and the value should be added as query parameters, like a form with GET method, but HTMx does the incorrect thing here: sends the values in the request’s body. That’s why i have to use a custom header and the `hx-header` directive to include the CSRF token. Then, by default HTMx targets the triggered element for swap with the response from the server, but after a logout i want to redirect the user to the login form again. I could set the hx-target to button to replace the whole body, or tell the client to redirect to the new location. I actually do not know which one is “better”. Maybe the hx-target is best because then everything is handled by the client, but in the case of logout, since it is possible that i might want to load scripts only for logged-in users in the future, i opted for the full page reload. However, HTMx does not want to reload a page that return HTTP 401, hence i had to include the GET method to /login in order to return the login form with a response of HTTP 200, which also helps when reloading in the browser after a failed login attempt. I am not worried with the HTTP 401 when attempting to load a page as guest, because this request most probably comes from the browser, not HTMx, and it will show the login form as intended—even though it is not compliant, since it does not return the WWW-Authenticate header, but this is the best i can do given that no cookie-based authentication method has been accepted[1]. [0]: https://www.w3.org/Bugs/Public/show_bug.cgi?id=10671#c16 [1]: https://datatracker.ietf.org/doc/id/draft-broyer-http-cookie-auth-00.html
2023-07-26 11:49:47 +00:00
msgid "Cross-site request forgery detected."
msgstr "Sha detectat un intent de falsificació de petició a llocs creuats."
#~ msgctxt "title"
#~ msgid "Edit Page"
#~ msgstr "Edició de pàgina"
#~ msgctxt "title"
#~ msgid "New Page"
#~ msgstr "Nova pàgina"
#~ msgctxt "input"
#~ msgid "Title"
#~ msgstr "Títol"
#~ msgctxt "input"
#~ msgid "Content"
#~ msgstr "Contingut"
#~ msgctxt "title"
#~ msgid "Pages"
#~ msgstr "Pàgines"
#~ msgctxt "action"
#~ msgid "Add Page"
#~ msgstr "Afegeix pàgina"
#~ msgctxt "header"
#~ msgid "Title"
#~ msgstr "Títol"
#~ msgid "No pages added yet."
#~ msgstr "No sha afegit cap pàgina encara."