We forgot that different accommodation types are not always operating on
the whole season calendar, thus we need a specific date for each type.
Someday i will add the field in the administration panel, but for now i
will have to add them by hand, as people are starting to book plots on
dates that are not operating.
To hold the common logic of detecting pagination, forming the key, and
splitting its values later on.
I can take advantage that a form with action="get" already adds its
fields to the query string to have a common template for pagination. The
only problem is that i have different column spans for different tables,
therefore had to add a colspan to the struct.
It is just the index of bookings in the created state, but we thought it
would make easier to understand the difference between a booking from
a customer not yet confirmed, from a booking confirmed or created by the
staff.
Most will be families living at the same address. And, if they are not,
it is far easier to replace the incorrect address with the actual,
rather than write the same address to all family members under the same
household.
Copied as much as i could from Numerus, and made as few modifications as
i could to adapt to this code base; it is, quite frankly, a piece of
shit.
We need to be able to create invoices from scratch “just in case”,
apparently, but it is not yet possible to create an invoice from a
booking.
I need to retrieve the values from the database and put them in the
form, like all other forms, but in this case the processing is done as
if it were a new form, because everything comes from the query string
and there is no need to do any extra work then.
Had to move the <footer> from the fields.gohtml to form.gohtml because
then it could not know that it was editing an existing booking. Had to
move the <fieldset> out too, in order to give it an ID and make it
htmx’s target, or it would replace the form, causing even more problems
—the button would disappear then—. The target **must** be in <form>
because it is needed for tis children’s hx-get and for its own hx-put.
At first i thought i would need to keep the second query of draftPayment
in newBookingCart, its caller, and i added these fields to pass back
the parsed or retrieved values, but when i could move that query within
draftPayment i forgot to remove them.
I wanted to use a regular <a>, but apparently rendering that many
anchors is too resource-intensive for Firefox, and it is noticeably
slower. It was even worse, in fact, because i had to have different
content for the main grid and the grid show in the new booking form,
as i did not want to have these links there, and had call a template for
each cell: 3 months × ~30 days × ~100 campsites = 9000 calls!
Using JavaScript for that is shameful, but it does not add much to the
existing markup, and no need for template fuckery.
I am using double-click to follow these links, instead of single click,
because it would be too easy to misclik on the grid, but that forced me
to add `user-select: none` to prevent the selection of text when double-
clicking.
Had to bring the same fields that i have for a payment to booking,
except that some of those should be nullable, because it is unreasonable
to ask front desk to gather all customer data when they have a booking
via phone, for instance.
Therefore, i can not take advantage of the validation for customer data
that i use in the public-facing form, but, fortunately, most of the
validations where in separated functions, thus only had to rewrite that
one for this case.
I already have to create a booking from a payment, when receiving a
payment from the public instance, thus i made that function and reused
it here. Then i “overwrite” the newly created pre-booking with the
customer data from the form, and set is as confirmed, as we do not see
any point of allowing pre-bookings from employees.
It does nothing but compute the total of a booking, much like it does
for guests. In fact, i use the same payment relations to do the exact
same computation, otherwise i am afraid i will make a mistake in the
ACSI or such, now or in future version; better if both are exactly the
same.
The idea is that once the user creates the booking, i will delete that
payment, because it makes no sense to keep it in this case; nobody is
going to pay for it.
Had to reuse the grid showing the bookings of campsites because
employees need to select one or more campsites to book, and need to see
which are available. In this case, i have to filter by campsite type
and use the arrival and departure dates to filter the months, now up to
the day, not just month.
Had to change max width of th and td in the grid to take into account
that now a month could have a single day, for instance, and the month
heading can not stretch the day or booking spans would not be in their
correct positions.
For that, i needed to access campsiteEntry, bookingEntry, and Month from
campsite package, but campsite imports campsite/types, and
campsite/types already imports booking for the BookingDates type. To
break the cycle, had to move all that to booking and use from campsite;
it is mostly unchanged, except for the granularity of dates up to days
instead of just months.
The design of this form calls for a different way of showing the totals,
because here employees have to see the amount next to the input with
the units, instead of having a footer with the table. I did not like
the idea of having to query the database for that, therefore i “lifter”
the payment draft into a struct that both public and admin forms use
to show they respective views of the cart.
After months of keeping what does the ACSI checkbox mean, now customer
told us that we should add a discount based on a series of
arbitrary conditions that, and need to be done NOW!
There is no UI to edit the conditions due to lack of time.
Apparently, the bank has to validate the fucking thing on the actual
domain, because of reasons, so we have to replace the current web in
production with this version in test mode, meaning that users **will**
believe they have paid, when in fact they have not.
The warning is for these few people that actually read such notices.
Had to do a couple of changes to the database: add the currency_code to
the payment relation, to format the price according to the payment’s
currency instead of the company’s; and the reference SQL function, to
replace the equivalent golang function, so that i can use it to index
payments.
The rest is mostly the same as any other page, except that the
individual payment’s page is not a form, but a regular info dump.
I also moved the payment settings as a sub-route of payments, as i
believe this makes more sense than an additional user menu item.
Customer wants to require a down payment of 30 % for bookings made
one week or more before the actual date, and to make the full payment
otherwise.
This would require yet another relation to keep these values. Fuck it;
i added them to the function, as they are very unlikely to change.
That forced me to change the test for draft_payment to use relative
dates, otherwise there is no way i can have stable results in the
future.
This way i can use the function in the from clause of the query that
i already had to do to get the totals formatted with to_price. In this
case, i believe it is better to leave out Go’s function because it would
force me to perform two queries.
Instead of binding a nullable string pointer with the payment’s slug,
i wanted to use pgtype’s zeronull.Text type, but it can not work in this
case because it encodes the value as a text, while the parameters is
uuid. I can not use zero.UUID, because it is a [16]byte array, while i
have it in a string.
Thus, had to create my own ZeroNullUUID type that use a string as a base
but encodes it as a UUID.
I had to add the payment concept separate from the booking, unlike other
eCommerce solutions that subsume the two into a single “order”, like
WooCommerce, because bookings should be done in a separate Camper
instance that will sync to the public instance, but the payment is done
by the public instance. There will be a queue or something between
the public and the private instance to pass along the booking
information once the payment is complete, but the public instance still
needs to keep track of payments without creating bookings.
To compute the total for that payment i had to do the same as was doing
until now for the cart. To prevent duplications, or having functions
with complex return types, i now create a “draft” payment while the
user is filling in the form, and compute the cart there; from Go i only
have to retrieve the data from the relation, that simplifies the work,
actually.
Since the payment is computed way before customers enter their details,
i can not have that data in the same payment relation, unless i allow
NULL values. Allowing NULL values means that i can create a payment
without customer, thus i moved all customer details to a separate
relation. It still allows payment without customer, but at least there
are no NULL values.
Draft payments should be removed after a time, but i believe this needs
to be done in a cronjob or similar, not in the Go application.
To update the same payment while filling the same booking form, i now
have a hidden field with the payment slug. A competent developer would
have used a cookie or something like that; i am not competent.
Customer told us that there are some options, such as towels, that have
a fixed price for the whole stay, not a per night price. Thus, had to
add a boolean to know whether to use sum or max when computing the
cart’s total for each option.
It is a separate relation, instead of having a field in campsite_type,
because not all campsite types allow dogs. I could have added a new
field to campsite_type, but then its values it would be meaningless for
campsites that do not allow dogs, and a nullable field is not a valid
solution because NULL means “unknown”, but we **do** know the price —
none.
A separate relation encodes the same information without ambiguities nor
null values, and, in fact, removed the dogs_allowed field from
campsite_type to prevent erroneous status, such as a campsite type that
allows dogs without having a cost — even if the cost is zero, it has to
be added to the new relation.
Besides the dynamic final cart, that was already handled by HTMx, i had
to check the maximum number of guests, whether the accommodation allows
“overflow”, whether dogs are allowed, and that the booking dates were
within the campground’s opening and closing dates.
I could do all of this with AlpineJS, but then i would have to add the
same validation to the backend, prior to accept the payment. Would not
make more sense to have them in a single place, namely the backend? With
HTMx i can do that.
However, i now have to create the form “piecemeal”, because i may not
have the whole information when the visitor arrives to the booking page,
and i still had the same problem as in commit d2858302efa—parsing the
whole form as is would leave guests and options field empty, rather than
at their minimum values.
One of the fieldsets in that booking form are the arrival and departure
dates, that are the sames we use in the campsite type’s page to
“preselect” these values. Since now are in a separate struct, i can
reuse the same type and validation logic for both pages, making my
JavaScript code useless, but requiring HTMx. I think this is a good
tradeoff, in fact.
I have to ask number and age ranges of hosts of guests for all campsite
types, not only those that have price options for adults, children, etc.
because i must compute the tourist tax for adults. These numbers will
be used to generate de rows for guests when actually creating the
booking, which is not done already.
To satisfy the campsite types that do have a price per guest, not only
per night, i had to add the prices for each range in the
campsite_type_cost relation. If a campsite type does not have price
per person, then that should be zero; the website then does not display
the price.
The minimal price for any campsite type is one adult for one night,
thus to compute the price i need at least the campsite type, the dates,
and the number of adults, that has a minimum of one. I changed the
order of the form to ask for these values first, so i can compute the
initial price as soon as possible. To help further, i show the
<fieldset>s progressively when visitors select options.
The “overflow” is for when people want to book plots for more guests
than is permitted, which the system would need to add a new plot to the
“shopping cart”, as it were; not implemented yet.
The ask zone preferences is to whether show the corresponding input on
the booking form, that it was done implicitly when the campsite type had
options, because up until now it was only for plots, but it is no longer
the case, thus i need to know when to show it; now it is explicit.
I use Sortable, exactly like HTMx’s sorting example does[0]. Had to
export the slug or ID of some entries to be able to add it in the hidden
input.
For forms that use ID instead of slug, had to use an input name other
than “id” because otherwise the swap would fail due to bug #1496[1]. It
is apparently fixed in a recent version of HTMx, but i did not want to
update for fear of behaviour changes.
[0]: https://htmx.org/examples/sortable/
[1]: https://github.com/bigskysoftware/htmx/issues/1496
If i parse everything, then the campsite type options no longer have
their minimum values preset, meaning that people have to input each and
every one of them.
Had to change setup_redsys because admins can not read the current
encrypt key, thus it is not possible to `set encrypt_key =
coalesce(…, encrypt_key)`.
Not that it did much sense, anyway, as i was already inside the branch
of the if when encrpty_key is null.
However, it seems that this also affects in the `on conflict` update. I
assume this is because `excluded` is some kind of row of the relation
and has the same restrictions.
user.Language is the language set in the database for the user, that in
the case of guests is always going to be ‘und’, that means Redsys would
select Spanish for everyone.
Every company need to have its own merchant code and encryption key,
thus it is not possible to use environment variables to keep that data,
and i have to store it in the database.
I do not want to give SELECT permission on the encryption key to guest,
because i am going to fuck it up sooner or later, and everyone would be
able to read that secret; i know it would. Therefore, i need a security
definer function that takes the data to encrypt, use the key to encrypt
it, and returns the result; nobody else should have access to that key,
not even admins!
By the way, i found out that every merchant receives the same key, thus
it is not a problem to keep it in the repository.
Since i need that SQL function to encrypt the data, i thought that i may
go the whole nine yards and sign the request in PostgreSQL too, after
all the data to sign comes from there, and it has JSON functions to
create and base64-code an object.
Fortunately, pg_crypto has all the functions that i need, but i can no
longer keep that extension inside the auth schema, because it is used
from others, and the public schema, like every other extensions, seems
more appropriate.
Instead of having the list of currency and language codes that Redsys
uses as constants in the code, i moved that as field to the currency
and language relations, so i can simply pass the lang_tag to the
function and it can transform that tag to the correct code; the currency
is from the company’s relation, since it is the only currency used in
the whole application (for now).
As a consequence, i had to grant execute to currency and the parse_price
functions to guest, too.
To generate the test data used in the unit tests, i used a third-party
PHP implementation[0], but i only got from that the resulting base64-coded
JSON object and signature, using the same that as in the unit test, and
did not use any code from there.
PostgreSQL formats the JSON as text differently than most
implementations i have seen: it adds spaces between the key name and
the colons, and space between the value and the separating comma. The
first implementation used replace() to format the JSON as exactly as
the PHP implementation, so that the result matches, and then tried to do
generate the form by hand using the output from PostgreSQL without the
replace(), to verify that Redsys would still accept my input. Finally,
i adjusted the unit test to whatever pg_prove said it was getting from
the function.
I still have the form’s action hard-codded to the test environment, but
the idea is that administrators should be able to switch from test to
live themselves. That means that i need that info in the redsys
relation as well. I think this is one of the few use cases for SQL’s
types, because it is unlikely to change anytime soon, and i do not need
the actual labels.
Unfortunately, i could not use enumerations for the request’s
transaction type because i can not attach an arbitrary number to the
enum’s values. Having a relation is overkill, because i would need
a constant in Go to refer to its primary key anyway, thus i kept the
same constant i had before for that. Language and currency constant
went out, as this is in the corresponding relations.
In setup_redsys i must have a separate update if the encrypt_key is null
because PostgreSQL checks constraints before key conflict, and i do
not want to give a default value to the key if the row is not there yet.
The problem is that i want to use null to mean “keep the same password”,
because it is what i intend to do with the user-facing form: leave the
input empty to keep the same password.
As now Go needs to pass composite types back and forth with PostgreSQL,
i need to register these types, and i have to do it every time because
the only moment i have access to the non-pooled connection is in the
AfterConnect function, but at that point i have no idea whether the
user is going to request a payment. I do not know how much the
performance degrades because of this.
[0]: https://github.com/ssheduardo/sermepa/blob/master/src/Sermepa/Tpv/Tpv.php
The form is based on the one in the current website, but in a single
page instead of split into many pages; possibly each <fieldset> should
be in a separate page/view. The idea is for Oriol to check the design
and decide how it would be presented to the user, so i needed something
to show him first.
I hardcoded the **test** data for the customer’s Redsys account. Is
this bad? I hope not, but i am not really, really sure.
The data sent to Redsys is just a placeholder because there are booking
details that i do not know, like what i have to do with the “teenagers”
field or the area preferences, thus i can not yet have a booking
relation. Nevertheless, had to generate a random order number up to
12-chars in length or Redsys would refuse the payment, claiming that
the order is duplicated.
The Redsys package is based on the PHP code provided by Redsys
themselves, plus some hints at the implementations from various Go
packages that did not know why they were so complicated.
Had to grant select on table country to guest in order to show the
select with the country options.
I have changed the “Postal code” input in taxDetails for “Postcode”
because this is the spell that it is used in the current web, i did not
see a reason to change it—it is an accepted form—, and i did not want to
have inconsistencies between forms.
jordi fita mas