I created a common template to show the company address in the footer
and the contact page, and then i realized Go did not like to output my
phone URL in the anchor without having the tel: schema in the template.
I then removed that variable and now the URL is created with tel: and
the phone number with its spaces removed.
I was not sure whether to use PostGIS to store the GPS location of the
company, as i am sure i will only use that point just to show the map.
However, just in case, it is not a big deal.
There is no way to change that from the administration pages for now,
because of time constraints, and it is very unlikely that they will
change the campgrounds’ location in the near future.
The location is in a separate table because i did not want to have to
change every test file, to be honest, but this also makes the map
“optional” without the need for NULL values.
I added the contact address to every public page because the new design
adds it to the footer, so i will be needing it everywhere, just like the
menu.
Since i have my browser in English, the automatically detected language
is also set in English, making it harder for me to see if i added all
the translations; when the language is Catalan, i can see the
untranslated strings.
This calendar is supposed to be edited by admin users, but do not yet
have the complete JavaScript code to do so, thus for now i have made it
read-only.
I just found out that this is a feature introduced in PostgreSQL 10,
back in 2017.
Besides this being the standard way to define an “auto incremental
column” introduced in SQL:2003[0], called “identity columns”, in
PostgreSQL the new syntax has the following pros, according to [1]:
* No need to explicitly grant usage on the generated sequence.
* Can restart the sequence with only the name of the table and column;
no need to know the sequence’s name.
* An identity column has no default, and the sequence is better
“linked” to the table, therefore you can not drop the default value
but leave the sequence around, and, conversely, can not drop the
sequence if the column is still defined.
Due to this, PostgreSQL’s authors recommendation is to use identity
columns instead of serial, unless there is the need for compatibility
with PostgreSQL older than 10[2], which is not our case.
According to PostgreSQL’s documentation[3], the identity column can be
‘GENERATED BY DEFAULT’ or ‘GENERATED ALWAYS’. In the latter case, it is
not possible to give a user-specified value when inserting unless
specifying ‘OVERRIDING SYSTEM VALUE’. I think this would make harder to
write pgTAP tests, and the old behaviour of serial, which is equivalent
to ‘GENERATED BY DEFAULT’, did not bring me any trouble so far.
[0]: https://sigmodrecord.org/publications/sigmodRecord/0403/E.JimAndrew-standard.pdf
[1]: https://www.2ndquadrant.com/en/blog/postgresql-10-identity-columns/
[2]: https://wiki.postgresql.org/wiki/Don't_Do_This#Don.27t_use_serial
[3]: https://www.postgresql.org/docs/15/sql-createtable.html
I do not like confirmation messages: they question user’s actions, and
in general it is better to offer an undo option afterward. However, undo
is harder to implement, and currently i do not have time to do this.
The delete for the session is different because the only repercussion
would be to log in again; the user is not in danger of losing any data
whatsoever.
This one has an input to select the icon. It makes no sense to choose
an icon only by name, thus a <select> is not appropriate, and had to
use a hidden input with a row of button to choose the icon from. This
works now only because there are very few icons; we’ll need to choose
a different approach when there are many more icons.
Since now the icons have to be defined in CSS for both the public and
admin sections, i had to split it into a separate file that both sites
can use. I considered the option to “include” that CSS with m4, like
i do for images in demo.sql, but it made everything too complicated
(e.g., having to call make for each change in the CSS), and decided to
load that CSS in a separate <link>.
We discussed with Oriol how to show these “extra” menu items, as they
can’t be in the horizontal menu we have intended for employees, because
there is not enough horizontal space.
Oriol suggested to move these into the user menu. In fact, the company
settings was already there, which means that i already wanted to do that
from the very beginning, i believe, but i must have forgotten it along
the way…. Or maybe it was because this is where Numerus has the company
settings menu item, too, and i did not see the relation with the rest;
i do not know.
I decided to use a custom attribute for the campsite label in the SVG
because i was a bit wary of reusing ‘id’ for that, specially given that
most labels are number only and XML can not have IDs starting with a
number.
In fact, at least Inkscape and Affinity solve the problem by having an
additional foreign attribute to keep the “group label” in without that
restriction (‘inkscape:label’ and ‘serif:id’, respectively), thus i
thought of doing the same, but with a namespace that i control and be
independent of the design program.
However, it seems that Affinity does not have a way of editing the XML
attributes like Inkscape does[0], thus there is no way of adding or
editing that value from there; i can not ask Oriol to edit the SVG file
in a text editor each time.
We have agreed to reuse the ‘id’ attribute to contain the campsite’s
label by using a specific prefix, that we checked is editable without
issue in Affinity’s UI.
[0]: https://forum.affinity.serif.com/index.php?/topic/24318-xml-data/&do=findComment&comment=115609
I am using the US terms for campground and campsite, that’s why the
relation is called ‘campsite’ instead of ‘pitch’, but i used the wrong
terminology in the SVG map because the customer uses the UK term and
call themselves campsite, so i mixed things.
It is now the campground map and each individual area is a campsite,
as i have been using all along.
I did not remember that the file was loaded as a module, so i have
to export it in order to use from the <script> in media. That <script>
needs to be also a module and explicitly import the function; since it
is already loaded, the browser does not load the file again.
This link is supposed to be for employees, to see the map and check
on campsites’ availability. Currently, it shows the same for employees
and admins, but it will need to change.
I intend to use the same SVG file for customers and employees, so i had
to change Oriol’s design to add a class to layers that are supposed to
be only for customers, like trees. These are hidden in the admin area.
I understood that customers and employees have to click on a campsite to
select it, and then they can book or whatever they need to do to them.
Since customers and employees most certainly will need to have different
listeners on campsites, i decided to add the link with JavaScript. To
do so, i need a custom XML attribute with the campsite’s identifier.
Since i have seen that all campsites have a label, i changed the
“identifier” to the unique combination (company_id, label). The
company_id is there because different companies could have the same
label; i left the campsite_id primary key for foreign constraints.
In this case, as a test, i add an <a> element to the campsite with a
link to edit it; we’ll discuss with Oriol what exactly it needs to do.
However, the original design had the labels in a different layer, that
interfered with the link, as the numbers must be above the path and
the link must wrap the path in order to “inherit” its shape. I had no
other recourse than to move the labels in the same layer as the paths’.
Have to call Dialog.showModal when HTMx loaded the dialog in the DOM,
so had to add a onLoad event listened that checks whether the loaded
element is actually a DIALOG.
Had to restrict the margin: 0 for all elements (*) to exclude dialog,
because the browser sets it to auto, and i did not want to set it again
just because i was too overzealous with my “reset”.
The rest of the CSS is just to have a sticky header and footer, and see
the cancel button, that works as a “close”, all the time.
Finally, i realized that if i add the dialog at the end of the fieldset
and let HTMx inherit its hx-target and hx-swap, i no longer need to set
them in the dialog, as HTMx will always replace the fieldset, and i can
have the dialog side by side the current content of the fieldset, that
it was very confusing seeing it disappear when trying to select a new
media.
The cancel button could now just remove the dialog instead of making the
POST, but in local it makes no difference; we’lls see what happens on
production.
It makes easier to upload new images from the place where we need it,
instead of having to go to the media section each time.
It was a little messy, this one.
First of all, I realized that POSTint to /admin/media/picker to get the
new media field was wrong: i was not asking the server to “accept an
entity”, but only requesting a new HTML value, just like a GET to
/admin/media/upload requests the form to upload a new media, thus here
i should do the same, except i needed the query parameters to change the
field, which is fine—it is actually a different resource, thus a
different URL.
Then, i thought that i could not POST the upload to /admin/media,
because i returned a different HTML —the media field—, so i reused the
recently unused POST to /admin/media/picker to upload that file and
return the HTML for the field. It was wrong, because i was not
requesting the server to put the file as a subordinate of
/admin/media/picker, only /admin/media, but i did not come up with any
other solution.
Since i had two different upload functions now, i created uploadForm’s
Handle method to refactorize the duplicated logic to a single place.
Unfortunately, i did not work as i expected because uploadForm’s and
mediaPicker’s MustRender methods are different, and mediaPicker has to
embed uploadForm to render the form in the picker. That made me change
Handle’s output to a boolean and error in order for the HTTP handler
function know when to render the form with the error messages with the
proper MustRender handler.
However, I saw the opportunity of reusing that Handler method for
editMedia, that was doing mostly the same job, but had to call a
different Validate than uploadForm’s, because editMedia does not require
the uploaded file. That’s when i realized that i could use an interface
and that this interface could be reused not only within media but
throughout the application, and added HandleMultipart in form.
Had to create a different interface for multipart forms because they
need different parameters in Parse that non-multipart form, when i add
that interface, hence had to also change Parse to ParseForm to account
for the difference in signature; not a big deal.
After all that, i realized that i **could** POST to /admin/media in both
cases, because i always return “an HTML entity”, it just happens that
for the media section it is empty with a redirect, and for the picker is
the field. That made the whole Handle method a bit redundant, but i
left it nevertheless, as i find it slightly easier to read the
uploadMedia function now.
This is required if requesting an admin page via HTMx; i do not think it
is done as of now, except for the media picker, that has no layout
because i do not want to update the title.
It made no sense to have a file upload in each form that needs a media,
because to reuse an existing media users would need to upload the exact
same file again; this is very unusual and unfriendly.
A better option is to have a “centralized” media section, where people
can upload files there, and then have a picker to select from there.
Ideally, there would be an upload option in the picker, but i did not
add it yet.
I’ve split the content from the media because i want users to have the
option to update a media, for instance when they need to upload a
reduced or cropped version of the same photo, without an edit they would
need to upload the file as a new media and then update all places where
the old version was used. And i did not want to trouble people that
uploads the same photo twice: without the separate relation, doing so
would throw a constraint error.
I do not believe there is any security problem to have all companies
link their media to the same file, as they were already readable by
everyone and could upload the data from a different company to their
own; in other words, it is not worse than it was now.
This page is more or less similar to home, in terms of database: it
has a carousel and a list of items; in this case, the definition of
campsite services.
As i said early, when adding the home carousel, this carousel has its
own relation and set of functions to manage slides. They are also
duplicated in Go code, but i think i will need to refactor it later to
a carousel package or something like that, because both relations have
the exact same fields and types, so it makes no sense to have twice the
same code.
I already did it with the CSS and JavaScript code, mostly because it was
easier to replace the `.surroundings div` selector with `.carousel`, and
because that way i can have a single template that loads and initializes
Slick.
There is no UI to create or edit service definitions, although there are
the SQL functions, because i have no more time now, and Oriol needs to
check that the style is correct for that page.
This page is “highly stylized”, with a masonry-like grid, that i did not
know how to generate automatically from data defined in PostgreSQL,
therefore with Oriol we agreed to have this one as a static page and
we will see what we can do if the customer asks to be able to change
it.
I was a bit undecided on whether the icons in the bottom part of the
page should be defined in the CSS or with style="" and CSS variables,
like i do for the campsite type in the home page.
At first i thought that it should use CSS variables, mostly for
coherence: if another section of the web does it for its background
image, why no this one. The difference is that the home page is
dynamically created from the database, while this page is static and we
know what icons we need, thus it makes more sense to move it to the
stylesheet file, because then it will be downloaded by user agents that
actually want to use it (e.g., browsers, but not Braille terminals).
jordi fita mas
oriol carbonell pujolàs