I’ve removed the total amount because it is very difficult to get it
with pagination, and customer never saw it (it was from Numerus), thus
they won’t miss it—i hope.
It is just the index of bookings in the created state, but we thought it
would make easier to understand the difference between a booking from
a customer not yet confirmed, from a booking confirmed or created by the
staff.
Copied as much as i could from Numerus, and made as few modifications as
i could to adapt to this code base; it is, quite frankly, a piece of
shit.
We need to be able to create invoices from scratch “just in case”,
apparently, but it is not yet possible to create an invoice from a
booking.
Had to bring the same fields that i have for a payment to booking,
except that some of those should be nullable, because it is unreasonable
to ask front desk to gather all customer data when they have a booking
via phone, for instance.
Therefore, i can not take advantage of the validation for customer data
that i use in the public-facing form, but, fortunately, most of the
validations where in separated functions, thus only had to rewrite that
one for this case.
I already have to create a booking from a payment, when receiving a
payment from the public instance, thus i made that function and reused
it here. Then i “overwrite” the newly created pre-booking with the
customer data from the form, and set is as confirmed, as we do not see
any point of allowing pre-bookings from employees.
I need the campsite_id in booking to know what row to show the booking
at. Besides the need of knowing which actual campsite has been booked,
of course.
This field is nullable because we can not now it until an employee has
confirmed the booking; until that point we only know the campsite type
customer requested. I do not care much if the campsite_id is from a
different campsite_type, because maybe the customer requested the change
by phone or what have you, therefore the database can not be that
strict. It must have a value if the booking is confirmed.
It helps me if the arrival_date and departure_date is a single
daterange, because then i can use `&&` and other range operators to work
with these dates. For instance, i have to intersect it with the range
displayed on the screen in order to know which day i have to put it.
But then i have to know whether the booking begins and ends in the
display range, because i only have to show arrival and departure (i.e.,
the box half-way within the first or last boxes) on these days only.
Customer told us that they are used to a view of the booking status of
each campsite in the form of a grid: each campsite is a row, and each
day a column; bookings are show as boxes from the first day to the last
day on the corresponding campsite’s row.
I do not yet show the booking boxes, but at least now i have the grid
and date selector form in place.
In the form i would need a couple of input[type=month], but this is not
yet supported in Firefox and Safari. According to MDN, one common way
to bypass that problem is to have two fields, one for the month and the
other for the year; i just did that, but had to create a new input type
in the `form` package just for this.
Customer wants this because the booking is not automatically created,
thus it is possible to overbook. They want to accept the payment of
those that they can actually book.
After months of keeping what does the ACSI checkbox mean, now customer
told us that we should add a discount based on a series of
arbitrary conditions that, and need to be done NOW!
There is no UI to edit the conditions due to lack of time.
This is required by law.
I do not know why i have this value and the tax amount in the database,
but the payment percent and the number of days are hardcoded. I guess i
am such an inconsistent mess.
Apparently, the bank has to validate the fucking thing on the actual
domain, because of reasons, so we have to replace the current web in
production with this version in test mode, meaning that users **will**
believe they have paid, when in fact they have not.
The warning is for these few people that actually read such notices.
Had to do a couple of changes to the database: add the currency_code to
the payment relation, to format the price according to the payment’s
currency instead of the company’s; and the reference SQL function, to
replace the equivalent golang function, so that i can use it to index
payments.
The rest is mostly the same as any other page, except that the
individual payment’s page is not a form, but a regular info dump.
I also moved the payment settings as a sub-route of payments, as i
believe this makes more sense than an additional user menu item.
Customer wants to require a down payment of 30 % for bookings made
one week or more before the actual date, and to make the full payment
otherwise.
This would require yet another relation to keep these values. Fuck it;
i added them to the function, as they are very unlikely to change.
That forced me to change the test for draft_payment to use relative
dates, otherwise there is no way i can have stable results in the
future.
To send the actual mail with sendmail, i have stolen the code from
go-mail[0] and removed everything i did not need. This is because there
is no Go package to send email in Debian 12, and this was easier than
to build the DEB for go-mail.
Once i have the time….
[0]: https://go-mail.dev/
I had to add the payment concept separate from the booking, unlike other
eCommerce solutions that subsume the two into a single “order”, like
WooCommerce, because bookings should be done in a separate Camper
instance that will sync to the public instance, but the payment is done
by the public instance. There will be a queue or something between
the public and the private instance to pass along the booking
information once the payment is complete, but the public instance still
needs to keep track of payments without creating bookings.
To compute the total for that payment i had to do the same as was doing
until now for the cart. To prevent duplications, or having functions
with complex return types, i now create a “draft” payment while the
user is filling in the form, and compute the cart there; from Go i only
have to retrieve the data from the relation, that simplifies the work,
actually.
Since the payment is computed way before customers enter their details,
i can not have that data in the same payment relation, unless i allow
NULL values. Allowing NULL values means that i can create a payment
without customer, thus i moved all customer details to a separate
relation. It still allows payment without customer, but at least there
are no NULL values.
Draft payments should be removed after a time, but i believe this needs
to be done in a cronjob or similar, not in the Go application.
To update the same payment while filling the same booking form, i now
have a hidden field with the payment slug. A competent developer would
have used a cookie or something like that; i am not competent.
Customer told us that there are some options, such as towels, that have
a fixed price for the whole stay, not a per night price. Thus, had to
add a boolean to know whether to use sum or max when computing the
cart’s total for each option.
It is a separate relation, instead of having a field in campsite_type,
because not all campsite types allow dogs. I could have added a new
field to campsite_type, but then its values it would be meaningless for
campsites that do not allow dogs, and a nullable field is not a valid
solution because NULL means “unknown”, but we **do** know the price —
none.
A separate relation encodes the same information without ambiguities nor
null values, and, in fact, removed the dogs_allowed field from
campsite_type to prevent erroneous status, such as a campsite type that
allows dogs without having a cost — even if the cost is zero, it has to
be added to the new relation.
Besides the dynamic final cart, that was already handled by HTMx, i had
to check the maximum number of guests, whether the accommodation allows
“overflow”, whether dogs are allowed, and that the booking dates were
within the campground’s opening and closing dates.
I could do all of this with AlpineJS, but then i would have to add the
same validation to the backend, prior to accept the payment. Would not
make more sense to have them in a single place, namely the backend? With
HTMx i can do that.
However, i now have to create the form “piecemeal”, because i may not
have the whole information when the visitor arrives to the booking page,
and i still had the same problem as in commit d2858302efa—parsing the
whole form as is would leave guests and options field empty, rather than
at their minimum values.
One of the fieldsets in that booking form are the arrival and departure
dates, that are the sames we use in the campsite type’s page to
“preselect” these values. Since now are in a separate struct, i can
reuse the same type and validation logic for both pages, making my
JavaScript code useless, but requiring HTMx. I think this is a good
tradeoff, in fact.
I have to ask number and age ranges of hosts of guests for all campsite
types, not only those that have price options for adults, children, etc.
because i must compute the tourist tax for adults. These numbers will
be used to generate de rows for guests when actually creating the
booking, which is not done already.
To satisfy the campsite types that do have a price per guest, not only
per night, i had to add the prices for each range in the
campsite_type_cost relation. If a campsite type does not have price
per person, then that should be zero; the website then does not display
the price.
The minimal price for any campsite type is one adult for one night,
thus to compute the price i need at least the campsite type, the dates,
and the number of adults, that has a minimum of one. I changed the
order of the form to ask for these values first, so i can compute the
initial price as soon as possible. To help further, i show the
<fieldset>s progressively when visitors select options.
Had to change the link to the current language version of the page by a
button, to prevent following a link when trying to expand the submenu.
At first i did this with an `onclick="return false"` bullshit, but the
link was the wrong thing to do here, and it was there only to satisfy
Google et al. They will have to with the links in head.
Also made the link and buttons larger to make it easier to hit them with
finger.
Customer told us that the minimum number of nights is per campsite type,
not per season. And he wants this, along with the maximum number of
nights, in order to limit the range of departure dates that guests can
choose when booking.
It seems that we have to highlight the map zones too. On the previous
website, they had a mouseover effect that displayed a tooltip, but here
we can not do that because we use the mouse to select accommodations.
This is just a test to see whether Oriol likes how it is shown, thus the
red is likely to change to something else more pleasant to look at.
The “overflow” is for when people want to book plots for more guests
than is permitted, which the system would need to add a new plot to the
“shopping cart”, as it were; not implemented yet.
The ask zone preferences is to whether show the corresponding input on
the booking form, that it was done implicitly when the campsite type had
options, because up until now it was only for plots, but it is no longer
the case, thus i need to know when to show it; now it is explicit.
This is more or less the same as the campsites, as public information
goes, but for buildings and other amenities that the camping provides
that are not campsites.
A small page with a brief description, carousel, and feature list of
each individual accommodation.
Most of the relations and functions for carousel and features are like
the ones for campsite types, but i had to use the accommodation’s label
to find them, because they do not have slugs; i did not even though
these would be public, and they already have a label, although not
unique for all companies, like UUID slugs are.
It is virtually impossible to see when such a field fails prior to
submit the form, unless you happen to have the correct language selected
at the time.
Leave it to the backend’s validation for now.
Apparently, each campsite type could have different check-in and
check-out times, thus i need them in the database.
I thought about using an integer or a datetime field, but customer seems
to want a text field to maybe add “before” and “after” there as well.
Translatable text it is.
I also changed the translatable link to not include any HTML, because it
meant that i had to retranslate them just to add a new attribute, that
does not make much sense—the attribute is not even translatable, thus
all translations must include it verbatim.
I tried to use ../, and ../../ to make the routes relatives, but it
would not work well because the same page would have two URLs, one
ending with slash and another without, and the relative links would be
different on each case.
This is mostly because it is required for the “Digital Kit”, but it also
works in our favor because now i can version the URL to the static
resources.
Go 1.18 adds the info from git if the package is build from a git
repository, but this is not the case in OBS, so i instead relay on a
constant for the version number. This constant is “updated” by Debian’s
rules, mostly due to the discussion in [0].
[0]: https://github.com/golang/go/issues/22706
It is for people aged 17 or olded, not 16. I was confused by the
expression “over 16”, that **seems** to mean 17 or older, but actually
includes people aged 16, too.
There is no way, for now, to add, edit or remove users, because
currently we only need to list users.
I can not give admins access to the user table, for security
permissions, so i had to create a new view. I could name it also ‘user’
in ‘camper’ scheme, but then i was afraid i would have problems with
unit tests and their search_path, so instead i called it
‘company_user_profile’, which is like ‘user_profile’ but for all users
in ‘company_user’.
I created a new Go package for it, rather than add the admin handler in
‘auth’, because ‘template’ depends on ‘auth’, and rendering from ‘auth’
would cause a dependency loop.
I needed to have the roles in gettext to translate them, but there is
no obvious place where to put the call to PgettextNoop. For now, there
are in ‘NewAdminHandler’ because it is called once in the application’s
lifetime and they actually do not matter much.
This is a separate carousel from the one displayed at the bottom with
location info; it is, i suppose, a carousel for the hero image.
For the database, it works exactly as the home carousel, but on the
front had to use AlpineJS instead of Slick because it needs to show a
text popping up from the bottom when the slide is show, something i do
not know how to do in Slick.
It now makes no sense to have the carousel inside the “nature” section,
because the heading is no longer in there, and moved it out into a new
“hero” div.
Since i now have two carousels in home, i had to add additional
attributes to carousel.AdminHandler to know which URL to point to when
POSTing, PUTting, or redirecting.