This was requested by Oriol; there are no other technical or legal
requirements for this.
I can not simply append the customer name to the file because it could
have characters that are not valid in file name depending on the
operating system, so i have to “slugify” it.
Closes#65
Using Orca or similar accessibility tools, it was not possible to
understand what these “menus” were intended for because they had only
icons without any alternative text, thus nothing to speak aloud with.
By default, when using hx-boost, HTMx adds the `show:top` modifier to
`hx-swap`. This is actually the wanted behaviour in these cases,
because it means that you are following a link to a “different” page,
and it makes sense to start from the top.
However, for quote and invoice forms is a hindrance because you are
usually editing the bottom-most product, as new lines are appended,
therefore you are all the time having to scroll down to the line.
Every. Single. Time.
Here i reverted the show:top to just show:false to keep the scroll as
is. I also added the show:bottom to the new product button, because
that way the window show entirely the new line.
I could not use `show🪟bottom`, however, despite appearing in the
documentation, because that, somehow, ended up doing the same as
`show🪟top`. Not sure if a bug or something i did not understand.
Closes#58.
This allows to import an Excel file exported from Holded, because it is
our own user case. When we have more customers, we will give out an
Excel template file to fill out.
Why XLSX files instead of CSV, for instance? First, because this is the
output from Holded, but even then we would have more trouble with CSV
than with XLSX because of Microsoft: they royally fucked up
interoperability when decided that CSV files, the files that only other
applications or programmers see, should be “localized”, and use a comma
or a **semicolon** to separate a **comma** separated file depending on
the locale’s decimal separator.
This is ridiculous because it means that CSV files created with an Excel
in USA uses comma while the same Excel but with a French locale expects
the fields to be separated by semicolon. And for no good reason,
either.
Since they fucked up so bad, decided to add a non-standard “meta” field
to specify the separator, writing a `sep=,` in the first line, but this
only works for reading, because saving the same file changes the
separator back to the locale-dependent character and removes the “meta”
field.
And since everyone expects to open spreadsheet with Excel, i can not
use CSV if i do not want a bunch of support tickets telling me that the
template is all in a single line.
I use an extremely old version of a xlsx reading library for golang[0]
because it is already available in Debian repositories, and the only
thing i want from it is to convert the convoluted XML file into a
string array.
Go is only responsible to read the file and dump its contents into a
temporary table, so that it can execute the PL/pgSQL function that will
actually move that data to the correct relations, much like add_contact
does but in batch.
In PostgreSQL version 16 they added a pg_input_is_valid function that
i would use to test whether input values really conform to domains,
but i will have to wait for Debian to pick up the new version.
Meanwhile, i use a couple of temporary functions, in lieu of nested
functions support in PostgreSQL.
Part of #45
[0]: https://github.com/tealeg/xlsx
Eventually, we will allow people to upload their own profile images,
but until then we’ll use a “generic” profile icon instead of the closed
icon, that means nothing to users.
We wanted to have the same icon for that menu than for the Account item,
but the one we used until now did not look inside the round button for
the menu, thus we changed the two.
Related to #55.
These two fields are just for information purposes, as Numerus does not
have any way to wire transfer using these, but people might want to keep
these in the contact’s info as a convenience.
Since not every contact should have an IBAN, e.g., customers, and inside
SEPA (European Union and some more countries) the BIC is not required,
they are in two different relations in order to be optional without
using NULL.
For the IBAN i found an already made PostgreSQL module, but for BIC i
had to write a regular expression based on the information i gathered
from Wikipedia, because the ISO standard is not free.
These two parameters for the add_contact and edit_contact functions are
TEXT because i realized that these functions are intended to be used
from the web application, that only deals with texts, so the
ValueOrNil() function was unnecessarily complex and PostreSQL’s
functions were better suited to “convert” from TEXT to IBAN or BIC.
The same is true for EMAIL and URI domains, so i changed their parameter
types to TEXT too.
Closes#54.
We need to have contacts with just a name: we need to assign
freelancer’s quote as expense linked the government, but of course we
do not have a phone or email for that “contact”, much less a VATIN or
other tax details.
It is also interesting for other expenses-only contacts to not have to
input all tax details, as we may not need to invoice then, thus are
useless for us, but sometimes it might be interesting to have them,
“just in case”.
Of course, i did not want to make nullable any of the tax details
required to generate an invoice, otherwise we could allow illegal
invoices. Therefore, that data had to go in a different relation,
and invoice’s foreign key update to point to that relation, not just
customer, or we would again be able to create invalid invoices.
We replaced the contact’s trade name with just name, because we do not
need _three_ names for a contact, but we _do_ need two: the one we use
to refer to them and the business name for tax purposes.
The new contact_phone, contact_web, and contact_email relations could be
simply a nullable field, but i did not see the point, since there are
not that many instances where i need any of this data.
Now company.taxDetailsForm is no longer “the same as contactForm with
some extra fields”, because i have to add a check whether the user needs
to invoice the contact, to check that the required values are there.
I have an additional problem with the contact form when not using
JavaScript: i must set the required field to all tax details fields to
avoid the “(optional)” suffix, and because they _are_ required when
that checkbox is enabled, but i can not set them optional when the check
is unchecked. My solution for now is to ignore the form validation,
and later i will add some JavaScript that adds the validation again,
so it will work in all cases.
We have shown the application to a potential user, and they told us that
it would be very useful to have a total in the table’s footer, so that
they can verify the amount with the bank’s extracts.
It would be very unusual to have an expense from a customer, and we do
not have (yet) a name for supplier or whatever it should be here, so i
used the same name we use for the column in the table.
Had to add an `unsafe` function to be able to translate text with HTML
fragments in it, although the fragments are added back with printf
because the login link is actually not translatable.
The same as for invoices: to allow people to have their own numbering
scheme, and for these that start using the program in the middle of the
current year.
I have to use a value to be used as “none” for payment method and
contact. In PL/pgSQL add_quote and edit_quote functions, that value is
NULL, while in forms it is the empty string. I can not simply pass the
empty string for either of these fields because PL/pgSQL expects
(nullable) integers, and "" is not a valid integer and is not NULL
either. A conversion is necessary.
Apparently, Go’s nil is not a valid representation for SQL’s NULL with
pgx, and had to use sql.NullString instead.
I also needed to coalesce contact’s VATIN and phone, because null values
can not be scanned to *string. I did not do that before because
`coalesce(vatin, '')` throws an error that '' is not a valid VATIN and
just left as is, wrongly expecting that pgx would do the job of leaving
the string blank for me. It does not.
Lastly, i can not blindly write Quotee’s tax details in the quote’s view
page, or we would see the (), characters for the empty address info.
This is for new users that do not start using the application from the
beginning of the current fiscal year and, therefore, need to create
invoices starting from a specific number.
I had to change the constraint on the currval to allow zero, otherwise
it would not be possible to set 1 as the next number, because users
can also not delete the row.
It is better that way because it works without JavaScript; if HTMx is
not available, it will just use regulars forms.
The problem is that most of the submit buttons where using formaction
to send the request to a different action, and only one button was the
“real” action. Since i could not pass the formaction to
invoice-product-form template, i have changed the “default” action to
the one with “ancillary” functions.
I have to use a different action to remove for each product because i
can not pass the index to the backend without JavaScript: it only
depends on the button click, that already has a name for the action.
Thus, in a way, i have “merged” the action and the index in a single
name.
With this button, it is no longer necessary to set the quantity to zero
to remove, at least not with JavaScript. This is why i am using Alpine:
to use x-cloak and hide it from non-JavaScript users.
Although, i wonder if it would not be better to use HTMx for that?
I tried this already when i started adding filters, but i tried to use
AlpineJS for that, and could not because it would reset the context each
time i submitted the filters, due to HTMx replacing the whole content.
I realized that the only thing i need is some “flag” to show and hide
the form with CSS. I do not even need AlpineJS for that, but i used it
anyway because then i can use the x-cloak thing to hidde the toggle
button for users with JavaScript disabled.
Similarly, the body by default has that “flag” set in the markup, and is
removed when AlpineJS is initialized, thus if JavaScript is disabled the
filters form is shown nevertheless.
That column was supposed to have a checkbox for batch operations, but
we do not have any operation that would like to perform to many products
or contacts at the same time. For now, at least.
I want the `white-space: pre` to preserve the newline characters that
users may have used, but this prevents line wrapping and long lines are
not confined within the page margins.
`pre-line` preserves the newlines, but collapses spaces and tabs, and
wraps long text, which is more what i want.
I had to change MethodOverrider to check whether the form is encoded as
multipart/form-data or i would not be able to get the method field from
forms with files.
For now i add the file manually, i.e., outside add_expense and
edit_expense PL/pgSQL functions, because it was faster for me, but i
will probably add an attach_to_expense function, or something like that,
to avoid having the whole ON CONFLICT logic inside Golang—this belongs
to the database.
jordi fita mas
oriol carbonell pujolàs